Adept AdeptSight User Guide - Manual (Page 548)

V+ Table-Mounted Sample
3. Select the robot.
a. Click the browse icon to display a list of available robots.
b. Select the robot you wish to use.
c. Click OK
d. Click Next
The wizard records the robot information and opens the next page.
4. Select the end-effector.
The steps for selecting the end-effector are similar to those for selecting the robot.
5. Set the end-effector signal values.
Setting the End-effector Signal Values
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 548