Adept AdeptSight User Guide - Manual (Page 480)

Related Topics
Object Definition
Angle Angle of the found line. A line is defined as the line
passing through Vector Point X and Vector Point Y
at the given Angle.
Average Contrast Average grey-level contrast between light and
dark pixels on either side of the found line.
Fit Quality Fit Quality is the normalized, average error
between the calculated line and the actual edges
matched to the found line. Fit Quality ranges from
0 to 100, with 100 being the best quality. A value
of 100 means that the average error is 0. Con-
versely, a value of 0 means that the average
matched error is equal to the Conformity Tol-
erance.
Match Quality Match Quality corresponds to the percentage of
edges actually matched to the found line. Match
Quality ranges from 0 to 100, with 100 being the
best quality. A value of 100 means that edges
were matched to 100% of the points along the
found line. Similarly, a value of 20 means edges
were matched to 20% of the points along the
found line.
Line Finder Results
Related Topics
Line Finder on page 467
Configuring Line Finder Properties on page 471
Configuring Line Finder Properties - Advanced on page 475
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 480