Planet Technology IP DSLAM IDL-4801 - Manual (Page 108)

IDL series User Guide 108
OAM Operations Administration and Management
PIA PPPoE Intermediate Agent
RMON Remote Monitoring
STP Spanning Tree Protocol
SNTP Simple Network Time Protocol
SVL Shared VLAN Learning
SVM Shared VLAN for Multicast
Specific Agent Entities that use GenAg interfaces to manage the system
TEA Target Engine Agent
VC Virtual Channel
VLAN Virtual LAN
5.1.4 CLI Command Brief Description
CLI Command - Action List
<action> Description
alias Used to create an alias for any CLI command.
apply Used to apply a configuration file stored on the system
climode Modes of cli/Prio change of CLI task
commit Used to commit the active configuration to the flash.
Create Used to create configuration of objects corresponding to the identifier and parameters.
delete
Used to delete configuration of objects corresponding to the identifier and parameters.
If the delete action is confirmed, the configuration of objects will no longer exist.
defragment Defragment the compact blocks in flash
download Used to download a binary, configuration or user specific file from theremote host.
get Used to view information of the selected identifier and parameters.
help Used to view the detailed usage of CLI commands.
list Used to list the Configuration or binary files stored on the unit
logout Used to terminate the CLI.
memset Specify the length of memory set
modify
Used to set or modify existing configuration of objects corresponding to the identifier
and parameters.
passwd Used to change the password associated with a user login.
permission Use this command to change the permission of the files stored on flash
Ping Used to send one or more ICMP messages to another host for a reply.
prompt Used to set the new CLI prompt.
rdf Used to read Flash
rdm Used to read Memory
reboot Used to restart the system.
remove Used to remove a configuration or binary file stored on the unit
reset Used to reset a port of system.
save Used to save the configuration to Flash RAM.
Sync Used to Sync
traceroute Used to trace the route to the specified destination.
unalias Used to delete an alias.
upgrade Used to upgrade a configuration or binary file stored on the system.
verbose
Using this command, a user can view the status of entries before and after the
execution of a command (create, delete, modify, get).
wrm Used to write Memory