Planet Technology IP DSLAM IDL-4801 - Manual (Page 365)

IP DSLAM 365
Type: Modify -- Optional
Valid values: 0 – 31
Default value: ----
mplr mplr Multiplier, is used to multiply the value shifted by ShiftCount. It is
used to calculate the new base offset. This field is valid only if the
gsvClfrTreeNodeAction is SetBase.
Type: Modify -- Optional
Valid values: 1 - 32
Default value: ----
valtype
U8|U16|U32|U64|AtmI
f|Aal5Vc|EoaIf|EthIf|D
ir|Prio|Len|vlanid
Value type tells the type of value that is to be matched/set.
Sbvarindex
l2start|l3start
This specifies the setbase variable index. 'L2Start' is read-only,
containing Layer 2 header start offset. 'L3Start' is read-only,
containing Layer 3 header start offset.
Nodeprio
low|high|asintree
This specifies the priority of the tree node. Based on this priority
value, the tree node is created in fast or slow memory.
Example:
$ get clfr tree node tname tree1 pid 2 nodeid 3
Output:
Tree Name : tree1
Profile Id : 2 Node Id : 3
Exported : true Node Type : Binary
Modification Mask : act offset
Action : eq
Value Type : u32 Offset : 12
Mask : 0x0000000f
Value : 0x0000000f
ValueEnd : NA
Set Base type : NA
Shift Count : NA Multiplier : NA
Description : Node to match the ip address