Planet Technology IP DSLAM IDL-4801 - Manual (Page 242)

IDL series User Guide 242
Uncorrected Blocks Count of all encoded blocks received with uncorrected errors on this
channel during this interval.
Gs Time Elapsed(sec) Total time elapsed (in seconds) in this interval.
Valid Data Indicates if the data for this interval is valid.
GsNoCellDelineation Count of no cell delineation on this channel for this interval.
GsHeaderErrorCheck GlobespanVirata parameter. Header error check counter (hec) on this
channel during this interval (length = 4 bytes).
GsOutOfCellDelineatio
n
GlobespanVirata parameter. Count of out of cell delineation (ocd) on this
channel during this interval (length = 4 bytes).
AtucChanIntvlNcds Count of all blocks received with NCD errors on this channel during this
interval.(length = 4 bytes).
AtucChanIntvlLcds Count of all blocks received with LCD errors on this channel during this
interval.(length = 4 bytes).
5.9.6 ADSL ATUC Interval Commands
5.9.6.1 Get adsl atuc interval
Description:
This command is used to get.
Command Syntax:
get adsl atuc interval ifname <interface-name> [nintrvl <num-of-intervals>]
Parameters:
Name Description
ifname
<interface-name>
The ADSL ATUC channel interface name.
Type: Get -- Mandatory
Valid values: dsl-0 – dsl-23
nintrvl
<num-of-intervals>
Number of intervals.
Type: Get – Optional
Valid values : 1- 96
Default Value : 12
Example:
$ get adsl atuc interval ifname dsl-0 sintrvl 1 nintrvl 1