Planet Technology IP DSLAM IDL-4801 - Manual (Page 118)

IDL series User Guide 118
Document. This mapping is modifiable only when the
bridge port is in disabled state.
Type: Modify － Optional
Example:
$ get bridge port trfclassmap portid 1 regenPrio 1
Output:
PortId : 1 regenPrio : 1
TrafficClass : 2
Output field:
Field Description
PortId Port number of the port for which this entry contains
bridge management information.
regenPrio The Priority value evaluated for the received frame. In
our case, it is the regenerated user priority. This
regenerated priority is mapped from user priority
determined by a) packet classifier rule indicating user
priority for that port b) user priority received in the tag
header and c) default source priority of the port, in that
order. It lies in the range 0-7
TrafficClass The Traffic Class the received frame is mapped to. The
maximum value of trafficClass is defined by
numTrfClass parameter of Bridge Port PrioInfo. The
default value of this field shall be determined according to
table 7-2 described in ANSI/IEEE Std 802.1d 1998 Edition
Document. This mapping is modifiable only when the
bridge port is in disabled state.
References:
Bridge port commands