Planet Technology IP DSLAM IDL-4801 - Manual (Page 460)

IDL series User Guide 460
Mcastaddr
<mcastaddr-val >
A multicast MAC Address, learned through Igmp Snooping,
within the Vlan (igmpVlanIndex), to uniquely identify the entry,
for which the IgmpSnooping statistics are desired. The range of
accepted values is 00:30:4F:00:00:00 to 00:30:4F:7F:FF:FF
Type: Reset － Optional
Get － Optional
Valid values: 00:30:4F:00:00:00 - 00:30:4F:7F:FF:FF
portid <portid> A Bridge Port belonging to the Vlan (igmpVlanIndex) and Group
(igmpsnoopMcastAddress), for which the IgmpSnooping
statistics are desired.
Type: Reset --Optional
Get –Optional
Valid values: 1 - 386
Example:
$ get igmpsnoop port stats vlanid 6 mcastaddr 00:30:4f:0a:00:01 portid 6
Output:
VLAN Index : 6
Mcast Group Address : 00:30:4f:0a:00:01
Port Index : 6
Query Received : 100 Report Received : 200
Filter Mode : Include
Include SrcList : 10.12.14.16 12.10.45.76
Exclude SrcList : 10.12.34.56 34.54.76.87
Output field
Field Description
VLAN Index This parameter specifies the VlanId to uniquely identify the VlanId of the
entry, for which the IgmpSnooping statistics are desired. In devices
supporting "Shared Vlan for multicast" capability, the information for a
multicast MAC address is shared across vlans. Therefore, VlanId is an
optional parameter. In devices supporting "Independent Vlan for
multicast" capability, each vlan can have its own information for a
multicast MAC address. Hence VlanId is a mandatory parameter in all
the commands other than the get command. For no Vlan case, VlanId is
not required.
Mcast Group Address This parameter specifies a multicast MAC address, learnt through Igmp
Snooping, within the Vlan (igmpVlanIndex), to uniquely identify the
entry, for which the IgmpSnooping statistics are desired. The range of