Planet Technology IP DSLAM IDL-4801 - Manual (Page 142)

IDL series User Guide 142
5.4.4 LACP AGGRPort Info Commands
5.4.4.1 Get aggrport info
Description:
Use this command to get a LACP aggregator port information.
Command Syntax:
get lacp aggrport info [ifname <interface-name>]
5.4.4.2 Modify lacp aggrport info
Description:
Use this command to modify LACP aggregator port information.
Command Syntax:
modify lacp aggrport info ifname <interface-name> [actoradminkey
<actoradminkey-val>] [partadminkey <partadminkey-val>] [actorportprio
<actorportprio-val>] [partadminportprio <partadminportprio-val>] [actorsysprio
<actorsysprio-val>] [partadminsysprio <partadminsysprio-val>] [partadminsysid
<partadminsysid-val>] [partadminport <partadminport-val>] [actoradminstate
activity | timeout | aggr] [partadminstate activity | timeout | aggr] [aggrstatus
enable|disable] [pktpriority <pktpriority-val>]
Parameters:
Name Description
Ifname
<interface-name>
The IfName of the Ethernet interface for the
aggregator.
Type : Modify － Mandatory
Get － Optional
Valid values : eth-*, eoa-*
actoradminkey
<actoradminkey-val>
The current administrative value of the Key for the
Aggregator.
Type : Optional
Valid values: 1 - 2^16 – 1
partadminkey
<partadminkey-val>
The current administrative value of the Key for the
Aggregator's current protocol Partner.
Type : Optional
Valid values: 1 - 2^16 – 1
actorportprio The priority value assigned to this Aggregation