Planet Technology IP DSLAM IDL-4801 - Manual (Page 591)

IP DSLAM 591
5.24 SNTP Commands
5.24.1 SNTP Cfg Commands
5.24.1.1 Get sntp cfg
Description:
Use this command to get.
Command Syntax:
get sntp cfg
5.24.1.2 Modify sntp cfg
Description:
Use this command to modify.
Command Syntax:
modify sntp cfg [enable | disable]
Parameter:
Name Description
enable|disable
This specifies whether the SNTP service is
enabled or disabled. True means that SNTP is
enabled and False means that SNTP is disabled.
Type: Modify － Optional
Valid values: enable, disable
Example:
$ modify sntp cfg enable
Output:
Verbose Mode On/Off
Status : Enable
Output field:
Name Description
Status
This specifies whether the SNTP service is
enabled or disabled. True means that SNTP is
enabled and False means that SNTP is disab