35 filter subrule udp commands, 1 get filter subrule udp, 2 create filter subrule udp – Planet Technology IP DSLAM IDL-4801 User Manual

Page 443: 3 delete filter subrule udp

Advertising
background image

IP DSLAM

443

'asinrule', subrule priority will be same as specified in the rule.

Transport Header

This specifies the type of the transport header in the packet in which the

corresponding IP is being transported. If the value of this field is

'Ethernet', then the IP is being carried in the Ethernet header. If it is

'PPPoE', then the corresponding IP is being carried in the PPP header.

References:
z

Generic Filter Commands


5.13.35 Filter subrule UDP Commands

5.13.35.1 Get Filter subrule udp

Description:

Use this command to get.

Command Syntax:

get filter subrule udp [ruleid <ruleid-val>] [subruleid <subruleid-val>]

5.13.35.2 Create filter subrule udp

Description:

Use this command to create.

Command Syntax:

create filter subrule udp ruleid <ruleid-val > subruleid <subruleid-val >

[srcportfrom <srcportfrom-val >] [srcportto <srcportto-val >] [ dstportfrom

<dstportfrom-val > ] [ dstportto <dstportto-val > ] [ srcportcmp eq | neq | lt | leq |

gt | geq | any | inrange | exrange ] [ dstportcmp eq | neq | lt | leq | gt | geq | any

| inrange | exrange ] [ subruleprio low | high | asinrule] [ transporthdr ethernet

| pppoe ]

5.13.35.3 Delete filter subrule udp

Description:

Use this command to delete.

Command Syntax:

delete filter subrule udp ruleid <ruleid-val > subruleid <subruleid-val >


Advertising
This manual is related to the following products: