9 bridge static ucast commands, 1 get bridge static ucast, 2 create bridge static ucast – Planet Technology IP DSLAM IDL-4801 User Manual

Page 192: 3 delete bridge static ucast

Advertising
background image

IDL series User Guide

192

Cautions:
z

An entry in this table shall not be applicable for a bridge port created over

PPPOE/IPOE interface.

References:
z Bridge

Commands


5.6.9 Bridge static ucast Commands

5.6.9.1 Get bridge static ucast

Description:

Use this command to get.

Command Syntax:

get bridge static ucast [vlanid <vlanid-val>] [ucastaddr <ucastaddr-val>]

5.6.9.2 Create bridge static ucast

Description:

Use this command to create.

Command Syntax:

create bridge static ucast vlanid <vlanid-val> ucastaddr <ucastaddr-val>

[portid <portid-val>]

5.6.9.3 Delete bridge static ucast

Description:

Use this command to delete.

Command Syntax:

delete bridge static ucast vlanid <vlanid-val> ucastaddr <ucastaddr-val>










Advertising
This manual is related to the following products: