Planet Technology IP DSLAM IDL-4801 User Manual

Page 529

Advertising
background image

IP DSLAM

529

insertiwfsubop enable

| disable

This is used to indicate whether to add IWF suboption to

Columbia originated PPPoE discovery packets received for

this instance. This field is valid only for PPPOAE interface.

Type: Create -- Optional

Modify -- Optional

Default value: enable

portno <portno-val>

This field specifies Atm Port number.Its value is considered

only when the bitmask for portid is set in

ConfigSubOptionBitmask

Type: Create -- Optional

Modify -- Optional

Default value: \0

Example:

$ create pia instance entry portid 1 vlan 1 profileid 1 status enable vsatag

AddAlways configsuboptionbitmask aci acival "[ANI] atm 3/10:100.33î (slot = 3,

port = 10, vpi = 100, vci = 33)" raival "conexant noida" syncratefields

ActualDelaydnstrm iwftagfromclientact drop insertiwfsubop enable portno 10

Auto Output

Output:

Verbose Mode On

Entry Created

Port Id : 1 VLAN : 1

Profile Id : 1 PIA status : enable

PIAVsaOption : AddAlways

Config Sub Options Bitmask : aci

Agent Circuit Id : "[ANI] atm 3/10:100.33î (slot = 3, port = 10, vpi = 100, vci = 33)"

Remote Agent Id : "conexant noida"

SyncRateInfoField Bitmask : ActualDelaydnstrm

Act for IWFTag From Client : drop

Insert Iwf Subop : enable

Port No : 10

VCI : 33 VPI : 100

L2 type : Eth

Encap Type : Llcmux

Verbose Mode Off:

Entry Created

Advertising
This manual is related to the following products: