Planet Technology IP DSLAM IDL-4801 - Manual (Page 309)

IP DSLAM 309
5.9.27.3 Delete dsl system
Description:
Use this command to get.
Command Syntax:
delet dsl system
Parameters:
Name Description
dsltype Adsl | Sdsl |Shdsl | Vdsl Identifies the firmware to be downloaded.
Type: Create － Optional
Default value: Adsl
linecoding Other | Dmt |Cap | Qam |
Mcm | Scm
ADSL line code type.
Type: Create － Optional
Default value: Dmt
adsltxcfg ansit1413 | etsi|
q9921PotsNonOverlapped |
q9921PotsOverlapped
|q9921IsdnNonOverlapped
|q9921IsdnOverlapped
|q9921TcmIsdnNonOverlapped|
q9921TcmIsdnOverlapped |
q9922PotsNonOverlapped
|q9922PotsOverlapped
|q9922TcmIsdnNonOverlapped|
q9922TcmIsdnOverlapped |
q9921TcmIsdnSymmetric
|adslPlusPotsNonOverlapped|q9921Gspa
nPlusPotsNonOverlapped
|q9921GspanPlusPotsOverlapped
|q9923Adsl2PotsOverlapped|q9923Adsl2
PotsNonOverlapped
|q9925Adsl2PlusPotsOverlapped
|q9925Adsl2PlusPotsNonOverlapped
|q9923Readsl2PotsOverlapped
|q9923Readsl2PotsNonOverlapped
|adslPlusPotsOverlapped
|q9921GspanPlusPlusPotsNonOverlappe
d |q9921GspanPlusPlusPotsOverlapped
|q9923IsdnNonOverlapped
Transmission capabilities with which the DSL
system is configured. Its default value depends on the
Annex Type supported. Not valid for SHDSL.
Type: Create － Optional