Planet Technology IP DSLAM IDL-4801 - Manual (Page 197)

IP DSLAM 197
5.6.11 GARP Port Info Commands
5.6.11.1 Get garp port info
Description:
Use this command to get.
Command Syntax:
get garp port info [portid <portid-val>]
5.6.11.2 Modify garp port info
Description:
Use this command to modify.
Command Syntax:
modify garp port info portid <portid-val> [jointimer <jointimer-val>] [leavetimer
<leavetimer-val>] [leavealltimer <leavealltimer-val>]
Parameters:
Name Description
portid <portid-val> Index of the Bridge Port
Type : Get - Optional
Modify - Mandatory
Valid values: 1 - 386
jointimer
<jointimer-val>
The GARP Join time, in centiseconds. Join time value should be
less than half the Leave time value
Type :Optional
Valid values: 10-255
leavetimer
<leavetimer-val>
The GARP Leave time, in centiseconds. Leave time value should
be greater than 2 times Join time value.
Type : Optional
Valid values: 10-255
leavealltimer
<leavealltimer-val>
The GARP LeaveAll time, in centiseconds. LeaveAll time value
should be large (more than 15 times) relative to Leave time value.
Type : Optional
Valid values: 10-65535
Example:
$ get garp port info