Planet Technology IP DSLAM IDL-4801 - Manual (Page 566)

IDL series User Guide 566
5.22.3 RMON Memory Pool Info Commands
5.22.3.1 Get rmon mpool
Description:
Use this command to get.
Command Syntax:
get rmon mpool [rname <mpool-name>]
Parameters:
Name Description
rname mpool This parameter specifies the name of a particular memory pool.
Valid values : Any memory pool name present in the system.
A user can also give first few characeters of a memory pool
name. In that case all the memory pools whose name start with
those characters shall be displayed.
Example 1:
For variable size memory pool
$ get rmon mpool DCLFR113
Output:
Name : DCLFR113 Size : 5392
Min : 16 Free : 5360
Tasks Waiting : 0 Suspend Type : FIFO
StartAddr : 0x147b7d28 FirstTaskName : -
FirstAllocator : CLFR LastAllocator : CLFR
LastDellocater : CLFR LastFailUser : -
LastFailDellocater : - WaterMark : 84
TotalMemAlloc : 52 TotalMemFree : 52
MemAllocFailCount : 0 MemFreeFailCount : 0
MPoolType : DYNAMIC Threshold : 5392
Threhold Count : 0
LastMemAllocTime : Thu Jan 01 00:01:08 1970
LastMemFreeTime : Thu Jan 01 00:02:18 1970
LastMemAllocFailTime: -
LastMemFreeFailTime : -
ThresholdHitTime : -