Planet Technology IP DSLAM IDL-4801 - Manual (Page 306)

IDL series User Guide 306
Output Fields:
FIELD Description
Chip Id Identifies the chip to be build and initialized.
DSL Type Identifies the firmware to be downloaded.
Line coding ADSL line coding type. Not valid for SHDSL.
Adsl Tx Config Transmission capabilities with which the DSL system is configured. Its default value
depends on the Annex Type supported. Not valid for SHDSL.
Shdsl Tx Mode Annexure Type, specifies the regional settings for the SHDSL line. Only valid for SHDSL.
5.9.25 Dsl dsp chip Commands
5.9.25.1 Get dsl dsp chip
Description:
Use this command to get.
Command Syntax:
get dsl dsp chip [chipid <chipid-val>]
5.9.25.2 Reset dsl dsp chip
Description:
Use this command to get.
Command Syntax:
reset dsl dsp chip
Parameters:
Name Description
chipid chipid This object is the Index of Dsl Chip for which reset is to be done.
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 9
Example:
$ get dsl dsp chip chipid 1