Planet Technology IP DSLAM IDL-4801 - Manual (Page 152)

IDL series User Guide 152
Output:
Aggr IfName : aggr-0
PortList : eth-0 eth-1
Port List Interface type : None
Output Fields:
Field Description
Aggr IfName Index of the redundancy aggregator, for which layer2
interfaces are associated. Valid Value is aggr-0
PortList The complete list of active layer2 interfaces associated
with the aggregator interface by virtue of redundancy.
Each bit set represents the Ethernet interface, that is
actively associated with redundancy based
aggregation. An interface is actively associated with
aggregator interface, if data for the aggregator interface
can be transmitted/received over it.
Port List Interface type It denotes what type of interfaces (Physical ethernet)
are present in Port List. If no interface are present in
port list the value shall be None
5.4.9 Redundancy aggr stats Commands
5.4.9.1 Get rdncy aggr stats
Description:
Use this command to get.
Command Syntax:
get rdncy aggr stats [ifname <interface-name>]
5.4.9.2 Reset rdncy aggr stats
Description:
Use this command to reset.
Command Syntax:
reset rdncy aggr stats ifname <interface-name>