Planet Technology IP DSLAM IDL-4801 - Manual (Page 160)

IDL series User Guide 160
Modify － Optional
Valid values: 1 - 8
Default value: 8
maxvcibits
<maxvcibits-val>
This specifies the maximum number of active VCI bits configured for use
at this ATM interface.
Type: Create － Optional
Modify － Optional
Valid values: 1 - 16
Default value: 16
oamsrc <oamsrc-val> Loopback source id assigned to the ATM port. The ATM port will
respond to all loopback cells, which carry this OAM id. This field is not
valid if the atmtransporttype has the value packet.
Type: Create － Optional
Modify － Optional
Default value: 0xffffffffffffffffffffffffffffffff
orl <orl-val> This parameter specifies the output rate limiting value in KBPS to be
applied on this interface.
Type: Create － Optional
Modify － Optional
Valid values: 64 - 6000
Default value: 54000
trfclassprofileid
<trfclassprofileid-val>
This specifies the traffic class profile to be associated with the ATM port.
Type: Create － Optional
Modify － Optional
Valid values: 1 -8
Default value: 1
profilename
<profilename-val>
This specifies the scheduling profile to be associated with the ATM port.
Type: Create － Optional
Modify － Optional
Default value: "SPPROFILE"
ctlpktinstid
<ctlpktinstid-val>
This specifies the control packet instance identifier associated with this
interface. If the user does not provide any instance identifier while
creating an interface an instance is created internally from the default
profile governed by the macro 1 and associated to the interface. This will
reduce the total number to instances that can be now created by one.
The default instance is governed by macro 0. Type: Create － Optional
Valid values: 1 -146
Default value: 0
atmtransporttype cell
|packet
This specifies the transport type of the atm interface. This can be either
Cell which means that actual Atm Cells shall be received over the