Planet Technology IP DSLAM IDL-4801 - Manual (Page 341)

IP DSLAM 341
5.13.6 Clfr namedlist map Commands
5.13.6.1 Get clfr namedlist map
Description:
Use this command to get.
Command Syntax:
get clfr namedlist map [ifname <interface-name>]
5.13.6.2 Create clfr namedlist map
Description:
Use this command to create.
Command Syntax:
create clfr namedlist map ifname <interface-name>listid <listid-val>
5.13.6.3 Delete clfr namedlist map
Description:
Use this command to delete.
Command Syntax:
delete clfr namedlist map ifname <interface-name>
Parameter:
Name Description
ifname <interface-name> This specifies the eoa ,pppoe, ipoe or ethernet interface to which
named generic list is attached. Valid values for the field are between
EOA-0 and EOA-23 or between eth-0 and eth-1or between IPOE-0 and
IPOE-191 or between PPPOE-0 and PPPOE-192.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
listid <listid-val> This field stores the list identifier value.
Type: Create -- Mandatory
Valid values: 1 - 65535
Example
$ create clfr namedlist map ifname eoa-1 listid 2