Planet Technology IP DSLAM IDL-4801 - Manual (Page 355)

IP DSLAM 355
because of this node.
SBVar Index This specifies setbase variable index. This field is valid only if
'SetBaseType' is 'SetFromVar'. 'L2Start' is read-only containing
Layer 2 header start offset. 'L3Start' is read-only containing
Layer 3 header start offset. It should be ensured that packet is IP
packet before using 'L3Start' value
Node Priority This specifies the priority of profile node. Based on this priority
value, the profile node is created in fast or slow memory. In case
priority is specified as 'AsInTree', node priority will be same as
specified in the tree.
5.13.10 Clfr tree branch Commands
5.13.10.1 Get clfr tree branch
Description:
Use this command to get.
Command Syntax:
get clfr tree branch [tname <tname-val>] [pid <pid-val>] [nodeid <nodeid-val>]
[brtype <brtype-val>]
5.13.10.2 Create clfr tree branch
Description:
Use this command to create.
Command Syntax:
create clfr tree branch tname <tname-val>pid <pid-val>nodeid
<nodeid-val>brtype <brtype-val>childpid <childpid-val>
5.13.10.3 Delete clfr tree branch
Description:
Use this command to delete.
Command Syntax:
create clfr tree branch tname <tname-val>pid <pid-val>nodeid
<nodeid-val>brtype <brtype-val>