7 redundancy aggr info commands, 1 get rdncy aggr info – Planet Technology IP DSLAM IDL-4801 User Manual

Page 148

Advertising
background image

IDL series User Guide

148

Output Fields:

Field

Description

Interface

The Interface name of the Ethernet interface for the aggregator.

LACPDUs Rx

The number of valid LACP PDUs received on this Aggregation Port.

LACPDUs Tx

The number of LACP PDUs transmitted on this Aggregation Port.

MarkerPDUs Rx

The number of valid Marker PDUs received on this Aggregation Port.

MarkerPDUs Tx

The number of Marker PDUs transmitted on this Aggregation Port.

Marker Response

PDUs Rx

The number of valid Marker Response PDUs received on this

Aggregation Port.

Marker Response

PDUs Tx

The number of Marker Response PDUs transmitted on this

Aggregation Port.

Unknown Rx

The number of frames received, that either carry the Slow Protocols

Ethernet Type value, but contain an unknown PDU, or, are addressed

to the Slow Protocols group MAC Address, but do not carry the Slow

Protocols Ethernet Type.

Illegal Rx

The number of frames received, that carry the Slow

Protocols Ethernet Type value, but contain a badly

formed PDU or an illegal value of Protocol Subtype.

References:
z lacp

aggr

z

lacp aggrport list

z

lacp aggrport info.

5.4.7 Redundancy aggr info Commands

5.4.7.1 Get rdncy aggr info

Description:

Use this command to get.

Command Syntax:

get rdncy aggr info [ifname <interface-name]

Advertising
This manual is related to the following products: