14 igmp commands, 1 igmpsnoop cfg info commands, 1 get igmpsnoop cfg info – Planet Technology IP DSLAM IDL-4801 User Manual

Page 447: 2 modify igmpsnoop cfg info

Advertising
background image

IP DSLAM

447

priority value, the subrule is created in fast or slow

memory. In case priority is specified as 'asinrule',

subrule priority will be same as specified in the rule.

Transport Header

This specifies the type of the transport header in the

packet in which the corresponding IP is being

transported. If the value of this field is Ethernet, then the

IP is being carried in the Ethernet header. If it is PPPoE,

then the corresponding IP is being carried in the PPP

header.

References:
z

Generic Filter Commands


5.14 IGMP Commands

5.14.1 Igmpsnoop cfg info Commands

5.14.1.1 Get igmpsnoop cfg info

Description:

Use this command to get.

Command Syntax:

get igmpsnoop cfg info

5.14.1.2 Modify igmpsnoop cfg info

Description:

Use this command to modify.

Command Syntax:

modify igmpsnoop cfg info [ queryinterval <queryinterval-val> ] [ anxioustimer

<anxioustimer-val> ] [ v1hosttimer <v1hosttimer-val> ] [ lastmembqryinterval

<lastmembqryinterval-val> ] [ robustness <robustness-val> ] [ status Enable |

Disable ] [ reportsup Enable | Disable ] [ qryrespinterval <qryrespinterval-val> ]

[ proxyreportstatus Enable | Disable ] [ versionmask v1 | v2 | v3 ]

[ startupqryinterval <startupqryinterval-val> ] [ startupqrycount

<startupqrycount-val> ] [ lastmemberqrycount <lastmemberqrycount-val> ]

[ unsolicrprtinterval <unsolicrprtinterval-val> ]

Advertising
This manual is related to the following products: