Planet Technology IP DSLAM IDL-4801 - Manual (Page 665)

IP DSLAM 665
be dropped. If action is "transparently forward", then IGMP frames
received for this Vlan shall be forwarded transparently and learning
will not be done
Type: Create -- Optional
Modify -- Optional
Default value: Learn
igmpsnoopproxyreporting
Enable | Disable
This parameter provides a configuration option to choose between
transparent snooping or Proxy reporting behavior per Vlan.
Depending on the type of mode, IGMP module will perform either
transparent snooping or proxy reporting for the IGMP messages,
received on a Vlan. Here the Vlan which is being referred is the
one on which learning will happen. It will be multicast vlan, if
"Multicast Vlan option" is enabled.
Type: Create -- Optional
Modify -- Optional
Default value: Disable
igmpsnoopingressprio
igmpsnoopingressprio | none
This parameter specifies the ingress priority to be forced on the
incoming frame. If the ingress priority field has valid value, then
that value will be used for traffic class determination and packet
priority. If valid egress priority is configured for a port, then egress
priority shall override the ingress priority. In addition, there is
support of invalid value for ingress priority to indicate that the
priority is not to be forced on ingress frame for this port.Here the
Vlan which is being referred is the one on which learning shall
happen. It will be multicast vlan, if "Multicast Vlan option" is
enabled.
Type: Create -- Optional
Modify -- Optional
Valid values: 0 -7
Additional Values: 8
Default value: 8
darpstatus Enable | Disable This specifies whether ARP packets received on this VLAN are to
be directed to a single port using (VLANId, IP address) to bridge
port mapping learnt using DRA. This attribute is effective in
conjunction with the attribute 'gsvDot1dPortDirectedARP' of
'Dot1dBasePortExtTable' MO. ARP packets are to be directed as
mentioned above, only if both the flags are enabled. If any of the
two is disabled, the ARP packets will be forwarded as per the
normal bridging flow.
Type: Create -- Optional
Modify -- Optional