6 lacp aggrport stats commands, 1 get lacp aggrport stats, 2 reset lacp aggrport stats – Planet Technology IP DSLAM IDL-4801 User Manual

Page 147

Advertising
background image

IP DSLAM

147

5.4.6 LACP AGGRPort Stats Commands

5.4.6.1 Get lacp aggrport stats

Description:

Use this command to get LACP aggregator port statistics.

Command Syntax:

get lacp aggrport stats [ifname <interface-name>]

5.4.6.2 Reset lacp aggrport stats

Description:

Use this command to reset LACP aggregator port statistics.

Command Syntax:

reset lacp aggrport stats ifname <interface-name>

Note:

This command is not supported in this release.

Parameters:

Name

Description

Ifname

<interface-name>

The IfName of the Ethernet interface for the

aggregator.

Type : Modify - Mandatory

Get - Optional

Valid values : eth-*, eoa-*

Example :

$ get lacp aggrport stats ifname eth-0

Output:

Interface : eth-0

LACPDUs Rx : 1 LACPDUs Tx : 1

MarkerPDUs Rx : 1 MarkerPDUs Tx : 1

Marker Response PDUs Rx : 1 Marker Response PDUs Tx : 1

Unknown Rx : 1 Illegal Rx : 1

Advertising
This manual is related to the following products: