Planet Technology IP DSLAM IDL-4801 - Manual (Page 462)

IDL series User Guide 462
5.14.5.3 Delete igmpsnoop querier info
Description:
Use this command to delete.
Command Syntax:
delete igmpsnoop querier info vlanid <vlanid-val > portid <portid>
Parameters:
Name Description
vlanid <vlanid-val> The VLAN id for this VLAN. In devices supporting "Shared Vlan for
multicast" capability, the information for a multicast MAC address is
shared across VLANS. Hence, vlanid is optional and can be passed as
zero or a valid vlanid value. In devices supporting "Independent Vlan
for multicast" capability, each vlan can have its own information for a
multicast MAC address. Hence, VLAN id is a mandatory parameter
and a valid value of vlanid must be passed. For the case when the
attribute "McastDeviceCapabilities" of MO "sysSizingTable" has value
"none", VLAN id is not required. This feature is not supported for VLAN
with vlanid as 4097.VLAN here means the 802.1q Vlan in case of
Native Vlan mode and Virtual Vlan in case of Stacked Vlan Mode.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1-4095
portid <portid-val> A Bridge Port, belonging to the Vlan (dot1qVlanIndex), on which the
Querier exists.
Type: Create -- Mandatory
Delete -- Mandatory
Get --Optional
Valid values: 1 - 65535
Example:
$ create igmpsnoop querier info vlanid 6 portid 6