4 ipoe intf commands, 1 get ipoe intf, 2 create ipoe intf – Planet Technology IP DSLAM IDL-4801 User Manual
Page 478: 3 delete ipoe intf, 4 modify ipoe intf
IDL series User Guide
478
5.16.4 Ipoe intf Commands
5.16.4.1 Get ipoe intf
Description:
Use this command to get.
Command Syntax:
get ipoe intf [ifname <interface-name>]
5.16.4.2 Create ipoe intf
Description:
Use this command to create.
Command Syntax:
create ipoe intf ifname <interface-name> lowif <lowif-val> macaddrprof
<macaddrprof-val> [ethpkttype Type2 | 802_3] [inactivitytmrintrvl
<inactivitytmrintrvl-val>] [routingstatus enable | disable] [enable | disable]
5.16.4.3 Delete ipoe intf
Description:
Use this command to delete.
Command Syntax:
delete ipoe intf ifname <interface-name>
5.16.4.4 Modify ipoe intf
Description:
Use this command to modify.
Command Syntax:
modify ipoe intf ifname <interface-name> lowif <lowif-val> macaddrprof
<macaddrprof-val> [ethpkttype Type2 | 802_3] [inactivitytmrintrvl
<inactivitytmrintrvl-val>] [routingstatus enable | disable] [enable | disable]