Planet Technology IP DSLAM IDL-4801 - Manual (Page 392)

IDL series User Guide 392
interfaces and 'AllCpe' indicates all eoa , all ipoe and pppoe
interfaces. If a bridge port on aggregated interface is created then
this field can not have ifIndex of any specific ethernet interface.
Stage Id This field specifies the stage on the interface to which the rule in
the mapping belongs
Rule Id Rule Id of the rule in the mapping
Order Id This field indicates the order of the rule in the attached sequence.
The default value for this field will be same as the ruleid of the entry.
5.13.23 Filter rule stats Commands
5.13.23.1 Get Filter rule stats
Description:
Use this command to get.
Command Syntax:
get filter rule stats [ruleid <ruleid-val>]
Parameter:
Name Description
ruleid <ruleid> Unique identifier of a filter rule
Type: Get -- Optional
Valid values: 1- 65535
Example:
$ get filter rule stats ruleid 1
Output:
Rule Id : 1 Num Hits : 4354
Output field:
Field Description
Rule Id Unique identifier of a filter rule
Num Hits Number of packets that hit this rule
References:
z
Generic Filter Commands