34 filter subrule tcp commands, 1 get filter subrule tcp, 2 create filter subrule tcp – Planet Technology IP DSLAM IDL-4801 User Manual

Page 439

Advertising
background image

IP DSLAM

439

'any'. This field and the next field specify a range of protocol

types, if 'prototypecmp' is either 'inrange' or 'exrange'.

Otherwise only this field is valid

End ProtoType

End PPP protocol type of the range of PPP protocol types.

This field and 'prototypefrom' specifiy a range of ppp protocol

types if 'prototypecmp' is either 'inrange' or 'exrange'

Protocol comparison

Protocol comparison type

Subrule Priority

This specifies the priority of the subrule. Based on this priority

value, the subrule is created in fast or slow memory. In case

priority is specified as 'asinrule', subrule priority will be same as

specified in the rule.

References:
z

see generic filter related commands


5.13.34 Filter subrule TCP Commands

5.13.34.1 Get Filter subrule tcp

Description:

Use this command to get.

Command Syntax:

get filter subrule tcp [ruleid <ruleid-val>] [subruleid <subruleid-val>]

5.13.34.2 Create filter subrule tcp

Description:

Use this command to create.

Command Syntax:

create filter subrule tcp ruleid <ruleid-val> subruleid <subruleid-val>

[ srcportfrom <srcportfrom-val> ] [ srcportto <srcportto-val> ] [ dstportfrom

<dstportfrom-val> ] [ dstportto <dstportto-val> ] [ srcportcmp eq | neq | lt | leq |

gt | geq | any | inrange | exrange ] [ dstportcmp eq | neq | lt | leq | gt | geq | any

| inrange | exrange ] [ subruleprio low | high | asinrule] [ transporthdr ethernet

| pppoe ]




Advertising
This manual is related to the following products: