Planet Technology IP DSLAM IDL-4801 - Manual (Page 595)

IP DSLAM 595
5.25.2 System Configuration Save and Restore Commands
5.25.2.1 Commit
Description:
Use this command to commit the active configuration to the flash. This command is
not supported
Command Syntax:
commit [nbsize]
Parameters:
None
Example:
$ commit
Output:
Set Done
Caution:
This command will take some time to execute.
References:
reboot command
Download command.
5.25.2.2 Reboot
Description:
Use this command to reboot the system and to set the boot configuration.
Command Syntax:
reboot [control <nvram|network>] [dataplane <nvram|network>] [config
<network | default | last | backup | clean | minimum | safe >]