Planet Technology IP DSLAM IDL-4801 - Manual (Page 280)

IDL series User Guide 280
Curr Output
Pwr(dBm/10)
This conexant parameter indicates the measure of total output
power transmitted by this ATU. The value of this parameter is
dynamic and will also show the change in Tx power due to Power
Management. For example, the value will decrease in L2 low
power mode. This value can be negative.
DS Bin SNR Update Conexant parameter to enable or disable collection of
downstream SNR bin status
Bin SNR Margin(dB/10) Bin SNR margin for particular sub carrier
Oper Status The actual/current state of the interface. It can be either up or
down.
Admin Status The desired state of the interface. It may be either Up or Down.
5.9.23 ADSL Line Profile Commands
5.9.23.1 Get adsl line profile
Description:
Use this command to get.
Command Syntax:
get adsl line profile [ifname <interface-name>]
5.9.23.2 Modify adsl line profile
Description:
Use this command to modify.
Command Syntax:
modify adsl line profile ifname <interface-name> [ atucrateadaptation fixed |
adaptAtStartup | adaptAtRuntime ] [ gsparamtestinputfile
<gsparamtestinputfile-val> ] [ atuctargetsnr <atuctargetsnr-val> ]
[ atucmaxsnrmargin <atucmaxsnrmargin-val> ] [ atucgsrsintcorrectionup
125us | 250us | 500us | 1ms | 2ms | 4ms | disable ] [ atucdnshiftsnrmargin
<atucdnshiftsnrmargin-val> ] [ atucupshiftsnrmargin <atucupshiftsnrmargin-val> ]
[ atucminupshifttime <atucminupshifttime-val> ] [ atucmindnshifttime
<atucmindnshifttime-val> ] [ atucfastmintxrate <atucfastmintxrate-val> ]
[ atucintlmintxrate <atucintlmintxrate-val> ] [ atucfastmaxtxrate
<atucfastmaxtxrate-val> ] [ atucintlmaxtxrate <atucintlmaxtxrate-val> ]
[ atucmaxintldelay <atucmaxintldelay-val> ] [ type noChannel | fastOnly |
interleavedOnly | fastOrInterleaved | fastAndInterleaved ] [ atucgstxendbin
<atucgstxendbin-val> ] [ atucgstxstartbin <atucgstxstartbin-val> ]