Planet Technology IP DSLAM IDL-4801 User Manual

Page 224

Advertising
background image

IDL series User Guide

224

period, which causes the SNMP agent to send an

'adslAtucPerfLofsThreshTrap'.

Type: Modify -- Optional

Valid values: 0 - 900

atucthresh15minloss

<atucthresh15minloss-val>

The number of Loss of Signal Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfLossThreshTrap'.

Type: Modify -- Optional

Valid values: 0 - 900

atucthresh15minlols

<atucthresh15minlols-val>

The number of Loss of Link Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfLolsThreshTrap'.

Type: Modify -- Optional

Valid values: 0 - 900

atucthresh15minlprs

<atucthresh15minlprs-val>

The number of Loss of Power Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfLprsThreshTrap'.

Type: Modify -- Optional

Valid values: 0 - 900

atucthresh15miness

<atucthresh15miness-val>

The number of Errored Seconds encountered by an ADSL interface

within any given 15 minute performance data collection period,

which causes the SNMP agent to send an

'adslAtucPerfESsThreshTrap'.

Type: Modify -- Optional

Valid values: 0 - 900

atucthreshfastrateup

<atucthreshfastrateup-val>

Applies to 'Fast' channels only. Configured change in rate causing

an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate >= ChanPrevTxRate plus the value of this object.

Type: Modify -- Optional

atucthreshintlrateup

<atucthreshintlrateup-val>

Applies to 'Interleave' channels only. Configured change in rate

causing an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate >= ChanPrevTxRate plus the value of this object.

Type: Modify -- Optional

atucthreshfastratedn

<atucthreshfastratedn-val>

Applies to 'Fast' channels only. Configured change in rate causing

an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate <= ChanPrevTxRate minus the value of this

object.

Advertising
This manual is related to the following products: