Planet Technology IP DSLAM IDL-4801 - Manual (Page 258)

IDL series User Guide 258
Example:
$ get adsl atur channel ifname dsli-0
Output:
Ifname : dslf-0
Interleave Delay(ms) : 10 Curr Tx Rate(bps) : 10
Prev Tx Rate(bps) : 10 Crc Block Length(byte) : 10
Gs Curr Atm Status : 1 GsSymbolsPerRsWord : 10
GsRsDepth : 10 GsRedundantBytesPerRsCode : 10
AturChanPerfAtmCD : 10 AturChanPerfAtmCU : 10
AturChanGsINPup : 10 AturChanGsL0up : 10
AturChanGsM0up : 10 AturChanGsT0up : 10
AturChanGsB0up : 10
Output Fields:
FIELD Description
Ifname The ADSL Interface Name
Interleave Delay(ms) Interleave delay for this channel. Interleave delay
applies only to the interleave channel and defines the
mapping (relative spacing) between subsequent input
bytes at the interleaver input and their placement in the bit
stream at the interleaver output. Larger numbers provide
greater separation between consecutive input bytes in the
output bit stream, allowing for improved impulse noise
immunity at the expense of payload latency.
Curr Tx Rate(bps) Actual transmit rate on this channel
Prev Tx Rate(bps) The rate at the time of the last adslAturRateChangeTrap
event.
Crc Block Length(byte) Indicates the length of the channel data-block on which
the CRC operates.
Gs Curr Atm Status Indicates an ncd or lcd failure if the counter surpasses
127. If neither ATM counter surpasses 127, the return
value will be NoAtmDefect.
GsSymbolsPerRsWord Indicates number of DMT symbols per Reed- Solomon
code word (S) in the upstream direction Note that S is not
restricted to interleaved mode only. Even in fast mode, S
is a valid constant value and is equal to 1.
GsRsDepth Indicates interleaving depth (D) in the upstream direction
Note that D is not restricted to interleaved mode only.
Even in fast mode, D is a valid constant value and is