Planet Technology IP DSLAM IDL-4801 - Manual (Page 293)

IP DSLAM 293
GspanPlus15DB
gsannexctouqswitch
CUqSwitch6DB |
CUqSwitch6_5DB |
CUqSwitch7DB |
CUqSwitch8DB |
CUqSwitch9DB |
CUqSwitch10DB |
CUqSwitch11DB |
CUqSwitch12DB |
CUqSwitch13DB |
CUqSwitch14DB |
CUqSwitch15DB
Conexant parameter that is used to configure the switching point
between Annex C and G.Span Plus SUQ.(length = 4 bytes)
Type: Modify -- Optional
atucminsnrmgntime
<atucminsnrmgntime-val>
This parameter indicates the time when the snr margin violation is
allowed. After this time expires and current snr is less than min snr, the
DSL line is dropped by the APIs.
Type: Modify -- Optional
Valid values: 0 - 255
atuccustomerid WorldWide |
France | China | Portugal
This parameter indicates the customer ID.
Type: Modify -- Optional
atucmpsdmasktype
Adsl2MEu64 | Adsl2MEu60 |
Adsl2MEu56 | Adsl2MEu52 |
Adsl2MEu48 | Adsl2MEu44 |
Adsl2MEu40 | Adsl2MEu36 |
Adsl2MEu32 | Adsl2MAll
Conexant parameter that selects the PSD mask option to be used for
Adsl2M.
Type: Modify -- Optional
atucgsseltloopgauge 26awg
| 24awg
This parameter should be set to the expected loop gauge.
Type: Modify -- Optional
atucconfrateratio
<atucconfrateratio-val>
This parameter specifies the latency rate for both channels in a dual
latency configuration. This parameter must be set the parameter to a
value greater than 0 and less than 100.
Type: Modify -- Optional
Valid values: 0 - 100
Example:
$ get adsl line profile ifname dsl-0