27 filter subrule clfrtree commands, 1 get filter subrule clfrtree, 2 create filter subrule clfrtree – Planet Technology IP DSLAM IDL-4801 User Manual

Page 404

Advertising
background image

IDL series User Guide

404

Src Ip Addr Cmp

Source IP address comparison type.'Ingenlist' means check if

source IP address present in interface classifier generic

list.'Notingenlist' means check if source IP address not present in

interface classifier generic list. 'Ingenlist' and 'Notingenlist' are

invalid if the direction of the rule for which this subrule is being

created is 'out'.

Dest Ip Addr Cmp

Destination IP address comparison type.'Ingenlist' means check if

destination IP address present in interface classifier generic

list.'Notingenlist' means check if destination IP address not

present in interface classifier generic list.'Ingenlist' and

'Notingenlist' are invalid if the direction of the rule for which this

subrule is being created is 'out'.

Ip Src Addr Mask

The mask value for source IP address. The mask is applied over

the source IP address before checking against a value.

Ip Dest Addr Mask

The mask value for destination IP address. The mask is applied

over the destination IP address before checking against a value.

Subrule Prio

This specifies the priority of the subrule. Based on this priority

value, the subrule is created in fast or slow memory. In case

priority is specified as 'asinrule', subrule priority will be same as

specified in the rule.


5.13.27 Filter subrule clfrtree Commands

5.13.27.1 Get Filter subrule clfrtree

Description:

Use this command to get.

Command Syntax:

get filter subrule clfrtree [ruleid <ruleid-val>] [subruleid <subruleid-val >]

5.13.27.2 Create filter subrule clfrtree

Description:

Use this command to create.

Command Syntax:

create filter subrule clfrtree ruleid <ruleid-val > subruleid <subruleid-val >

tname <tname-val > entrypid <entrypid-val >


Advertising
This manual is related to the following products: