Planet Technology IP DSLAM IDL-4801 - Manual (Page 264)

IDL series User Guide 264
5.9.15 Adsl atur intervalext Commands
5.9.15.1 Get adsl atur intervalext
Description:
This command is used to get.
Command Syntax:
get adsl atur intervalext [ifname <interface-name>] [nintrvl <nintrvl-val>]
Parameters:
Name Description
ifname
<interface-name>
The ADSL interface name.
Type : Get – Mandator
Valid values: dsl-0 – dsl-23
nintrvl <nintrvl-val> Count from 1 through 96, of 15 minute intervals.
Type: Get -- Mandatory
Valid values: 1 - 96
Example:
$ get adsl atur intervalext IFNAME dsl-0 NINTRVL 1
Output:
Ifname : dsl-0
IntervalNumber : 1
IntervalSesl(sec) : 10 IntervalUasL(sec) : 10
IntervalFecsL(sec) : 10
Output Fields:
FIELD Description
Ifname The ADSL interface name.
IntervalNumber Count from 1 through 96, of 15 minute intervals.
IntervalSesl(sec) Count of seconds in the interval when there was severely errored seconds.
IntervalUasL(sec) Count of seconds in the interval when there was unavailable errored seconds.
IntervalFecsL(sec) Count of seconds in the interval when there was Forward error correction seconds.
References
z
atur interval related commands