22 filter rule map commands, 1 get filter rule map – Planet Technology IP DSLAM IDL-4801 User Manual

Page 389

Advertising
background image

IP DSLAM

389

subrules is all ANDed.

Action Value

The parameter should contain valid value for some actions that

require an additional input, other than setprio, retagprio, and

retagserviceprio actions. For sendtocontrol and copytocontrol

actions this parameter should contain control flow id (0-3). Other

values are invalid for this action. For modifytos action this

parameter should contain value to be set in TOS field in the packet

in the range 0 to 255. Other values are invalid for this action. The

application of this value is dependent on the mask parameter. For

setbaclevel action this parameter should contain valid Buffer

Admission Control level value of 0 or 1. For pktvlanid, retagvlanid,

pktservicevlanid and retagservicevlanid actions this parameter

should be filled with VLAN ID value in the range 1 to 4094. For

ratelimiter action this parameter should be filled with the valid

user-defined flow type value. For mirror action this parameter

should be filled with valid mirror context id. This parameter is

ignored for other actions. Specifying an invalid value for an action

would result in error when the rule is enabled.

Action Mask

This field is valid for sendtocontrol, copytocontrol and modifytos

actions only. For sendtocontrol and copytocontrol actions this

parameter should contain trap level 0xffffffff (trap disabled) or

0x00000000(trap enabled). Other values are invalid for this action.

For modifytos action, only lower 8-bits are taken into consideration

and other bits are ignored. In the mask if a bit location contains 1,

then the corresponding bit in the TOS field is overwritten with the

corresponding bit in action value. In the mask if a bit location

contains 0, then the corresponding bit in the TOS field remains

unchanged.


5.13.22 Filter rule map Commands

5.13.22.1 Get Filter rule map

Description:

Use this command to get.

Command Syntax:

get filter rule map [ifname <interface-name> | all | alleoa | alleth | allpppoe |

allcpe | allipoe] [stageid <stageid-val>] [ruleid <ruleid-val>]

Advertising
This manual is related to the following products: