Planet Technology IP DSLAM IDL-4801 - Manual (Page 600)

IDL series User Guide 600
Output::
None
Caution:
None.
References:
user command
5.25.4 System crash info Commands
5.25.4.1 Get system crash info
Description:
T This command is used to display a list of crashes that were encountered by the
system. This command is not supported on the Flashless system.
Command Syntax:
get system crash info [numentries <numentries-val>] [showview [general |
ctrlandstatusregs | stackregs | stackinfo | altwinregs | stdwinregs |
stdwinregsdetailed | coprocessorregs] +]
Parameters:
Name Description
Numentries
<numentries-val>
This specifies the last <numentries> number of crashes
encountered in the system.
Type: Optional
Valid values: 1 to 128
Default : 1
showview general |
ctrlandstatusregs |
stackregs | stackinfo |
altwinregs | stdwinregs
| stdwinregsdetailed |
coprocessorregs]+
The optional showview parameter shall help the user to view
selective details of the crash dump. The information on any one
or combination of crash dump sections can be retrieved by
ORing the following parameters:
•general
•ctrlandstatusregs
•stackregs
•stackinfo
•altwinregs
•stdwinregs
•stdwinregsdetailed