Planet Technology IP DSLAM IDL-4801 - Manual (Page 76)

IDL series User Guide 76
Step 12:
Input ‘list’ to show the path and s/w information
$list
Name Ver Time Size
Acc State
------------------------------------------------------------------------------------------------------------------
/nvram/bin/bootptftp/
TftpBootp.bin 1 Wed Jun 30 14:12:36 2004 111064 RO active
/nvram/bin/control/
CP.bin.gz 1 Wed Jun 30 14:12:36 2004 1280744 RW active
/nvram/bin/dataplane/
DP.bin.gz 1 Wed Jun 30 14:12:36 2004 231572 RW active
/nvram/bin/decompressor/
Decompressor.bin 1 Wed Jun 30 14:12:36 2004 81928 RO active
/nvram/bin/dslphy/
gsv_dsl_AD_DM_3C00000C.bin.gz 1 Wed Jun 30 14:12:36 2004 155220 RW active
/nvram/cfg/factorydef/
FD.cfg 1 Wed Jun 30 14:12:36 2004 19136 RW active
$
Step 13:
Input ‘remove fname /nvram/cfg/factorydef/FD.cfg version 1’ to remove the
obsolete FD.cfg file.
$remove fname /nvram/cfg/factorydef/FD.cfg version 1
FLASH program starts at ADDR 20008
File Removed
$
Step 14:
Input ‘download src FD.cfg dest /nvram/cfg/factorydef/FD.cfg ip 192.168.100.66’ to
download config file “fd.cfg” from Server PC to IP DSLAM.
Note:
The file name to download could be different from FD.cfg but do not change the path.
dest /nvram/cfg/factorydef/FD.cfg is the path of firmware file located on IP DSLAM.