Planet Technology IP DSLAM IDL-4801 - Manual (Page 265)

IP DSLAM 265
5.9.16 ADSL ATUR Perf Commands
5.9.16.1 Get adsl atur perf
Description:
This command is used to get.
Command Syntax:
get adsl atur perf [ifname <interface-name>]
Parameters:
Name Description
ifname
<interface-name>
The ADSL interface name.
Type : Get – Mandatory
Valid values: dsl-0 – dsl-23.
Example:
$ get adsl atur perf ifname dsl-0
Output:
Ifname : dsl-0
Perf Valid Intervals : 10
Perf Invalid Intervals : 10
PerfData Curr15Min Curr1Day Prev1Day
Time Elapsed/Monitored(sec) - 10 10 10
LOFS (sec) 10 10 10 10
LOSS (sec) 10 10 10 10
LPRS (sec) 10 10 10 10
ES (sec) 10 10 10 10
Output Fields:
FIELD Description
Ifname Ifindex of the type Adsl port
Perf Valid Intervals The number of previous 15-minute intervals in the interval table for
which data was collected.
Perf Invalid Intervals The number of intervals in the range from 0 to the value of
'adslAturPerfValid-Intervals' for which no data is available. This object
will typically be zero except in cases where the data for some intervals
are not available (e.g., in proxy situations).
Time Total elapsed seconds in the intervals – Curr15Min,