Planet Technology IP DSLAM IDL-4801 - Manual (Page 441)

IP DSLAM 441
srcportto <srcportto-val
>
End port number of the range of source port numbers. This field and
'srcportfrom' specifiy a range of TCP source port numbers if 'srcportcmp'
is either 'inrange' or 'exrange'
Type: Create -- Optional
Modify -- Optional
Default value: 65535
dstportfrom
<dstportfrom-val >
Start port number of the range of destination port numbers. This field is
invalid if 'dstportcmp' is 'any'. This field and 'dstportto' specifiy a range of
tcp destination port numbers if 'dstportcmp' is either 'inrange' or 'exrange'
Type: Create --Optional
Modify --Optional
Default value: 0
dstportto <dstportto-val
>
End port number of the range of destination port numbers. This field and
'dstportfrom' specifiy a range of tcp destination port numbers if
'dstportcmp' is either 'inrange' or 'exrange'. Otherwise this field is invalid
Type: Create -- Optional
Modify -- Optional
Default value: 65535
srcportcmp eq | neq | lt |
leq | gt | geq | any |
inrange | exrange
Source port comparison type
Type: Create -- Optional
Modify -- Optional
Default value: any
dstportcmp eq | neq | lt |
leq | gt | geq | any |
inrange | exrange
Destination port comparison type
Type: Create -- Optional
Modify -- Optional
Default value: any
subruleprio low | high |
asinrule
This specifies the priority of the subrule. Based on this priority value, the
subrule is created in fast or slow memory. In case priority is specified as
'asinrule', subrule priority will be same as specified in the rule.
Type: Create -- Optional
Modify -- Optional
Default value: asinrule
transporthdr ethernet |
pppoe
This specifies the type of the transport header in the packet in which the
corresponding IP is being transported. If the value of this field is 'Ethernet',
then the IP is being carried in the Ethernet header. If it is 'PPPoE', then
the corresponding IP is being carried in the PPP header.
Type: Create -- Optional
Modify -- Optional
Default value: Ethernet