Planet Technology IP DSLAM IDL-4801 - Manual (Page 220)

IDL series User Guide 220
5.8 DHCP Commands
5.8.1 DHCP Client Commands
5.8.1.1 Get dhcp client info
Description:
Use this command to get DHCP client information for clients, on the specified
interface, or for all the interfaces.
Command Syntax:
get dhcp client info [ifname <interface-name>]
Parameters:
Name Description
Ifname
<interface-namef>
This specifies the interface name on which DHCP is running. If this
is not specified, then information for clients on all such interfaces will
be displayed.
Type : Optional
Valid values : eth-*, aggr-*
Mode:
Super-User, User
Example:
$get dhcp client info ifname eth-0
Output:
If-name Server Status Lease Start Date Lease Time (sec)
------------------------------------------------------------
eth-0 1.1.1.1 Bound Thu Jan 01 00:00:38 1970 500
Output Fields:
FIELD Description
If-Name
This is an interface on which DHCP is running: It can be :
eth-*, aggr-*
Server
This specifies the address of the DHCP server with whom
the client has obtained the IP address and other
configuratio.s
Status This specifies the current state of the client. It may be:Init,