Planet Technology IP DSLAM IDL-4801 - Manual (Page 517)

IP DSLAM 517
draaddop82tounicast
disable | enable
This field specifies whether Option 82 is to be added to DHCP
Unicast packets or not. If enabled Option 82 will be added to
DHCP Unicast Packets and when disabled, it will not be added.
Type: Create -- Optional
Modify -- Optional
Default value: enable
Example:
$ create dra instance entry portid 1 vlan 5 profileid 1 status client op82 AddAlways
configsuboption aci acival "[ANI] atm 3/10:100.33" (slot = 3, port = 10, vpi = 100,
vci = 33)" raival "conexant noida" syncratefields ActualDelaydnstrm
op82fromclientact drop learning enable portno 10 draaddop82tounicast enable
Auto
Output:
Verbose Mode On
Entry Created
Port Id : 1 VLAN : 5
Profile Id : 1 DRA status : client
Option82 : AddAlways
Config Sub-Option : aci
Agent Circuit Id : "[ANI] atm 3/10:100.33" (slot = 3, port = 10, vpi =
100, vci = 33)"
Remote Agent Id : "conexant noida"
SyncRateInfoField : ActualDelaydnstrm
DRA Act For Op82 From Client : drop
DRA learning : enable Port No : 10
VCI : 33 VPI : 100
L2 type : Eth Encap Type : Llcmux
DRA Add Op82 To Unicast : enable
Verbose Mode Off:
Entry Created
Output field:
Field Description
Port Id Bridge Port Identifier
VLAN VLAN identifier. In case of stacked mode this is virtual VLAN
Profile Id DRA profile identifier. This shall be used for this DRA instance