30 filter subrule icmp commands, 1 get filter subrule icmp, 2 create filter subrule icmp – Planet Technology IP DSLAM IDL-4801 User Manual

Page 422: 3 delete filter subrule icmp

Advertising
background image

IDL series User Guide

422

which corresponding IP is being transported. If value of this

field is 'ethernet', then IP is being carried in ethernet header

and if it is 'pppoe' then corresponding IP is being carried in

PPP header.This field is valid only when value of 'offsethdr' is

any one of ip, tcp, udp, icmp or igmp.Otherwise this field is

extra

NamedList Id

This specifies the list identifier value of the named list which

will be used to do the lookup .In case 'gencmp' is 'innamedlist'

or 'notinnamedlist', this field is manadatory else it is extra.

References:
z

Generic filter commands


5.13.30 Filter subrule ICMP Commands

5.13.30.1 Get Filter subrule icmp

Description:

Use this command to get.

Command Syntax:

get filter subrule icmp [ruleid <ruleid-val>] [subruleid <subruleid-val>]

5.13.30.2 Create filter subrule icmp

Description:

Use this command to create.

Command Syntax:

create filter subrule icmp ruleid <ruleid-val>subruleid <subruleid-val>

[ icmptype<icmptype-val> ] [ icmpcode <icmpcode-val> ] [ icmptypecmp eq |

neq | any ] [ icmpcodecmp eq | neq | any ] [ subruleprio low | high | asinrule]

[ transporthdr ethernet | pppoe ]

5.13.30.3 Delete filter subrule icmp

Description:

Use this command to delete.

Command Syntax:

delete filter subrule icmp ruleid <ruleid-val> subruleid <subruleid-val>

Advertising
This manual is related to the following products: