Planet Technology IP DSLAM IDL-4801 - Manual (Page 143)

IP DSLAM 143
<actorportprio-val> Port Type : Optional
Valid values : 0 - 2^8 – 1
partadminportprio
<partadminportprio-val
>
The current administrative value of the port priority,
for the protocol Partner.
Type : Optional
Valid values: 0 – 255
actorsysprio
<actorsysprio-val>
A 2-octet read-write value indicating the priority
value associated with the Actor's System ID.
Type : Optional
Valid values: 0 – 255
partadminsysprio
<partadminsysprio-val>
A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID.
Type : Optional
Valid values: 0 - 255
partadminsysid
<partadminsysid-val>
A 6-octet read-write MACAddress value
representing the administrative value of the
Aggregation Port’s protocol Partner's SystemID
Type : Optional
Valid values: 00:00:00:00:00:00 - ff:ff:ff:ff:ff:ff
partadminport
<partadminport-val>
The current administrative value of the port
number for the protocol Partner.
Type : Optional
Valid values: 0 - 65535
actoradminstate
activity | timeout |
aggr
Administrative state of actor
Type: Optional
partadminstate
activity | timeout |
aggr
Administrative state of Partner.
Type: Optional
aggrstatus
enable|disable
Specifies whether aggregation(bonding) is to be
enabled over this Aggregation Port.
Type : Optional
Valid values: enable|disable
pktpriority
<pktpriority-val>
For LACP PDUs, this priority shall be used for
choice of traffic class/Queue on outgoing interface.
Type: Modify Optional
Valid values: 0 - 7