3 abond link entry commands, 1 get abond link entry, 2 create abond link entry – Planet Technology IP DSLAM IDL-4801 User Manual
Page 128: 3 delete abond link entry, 4 modify abond link entry
IDL series User Guide
128
5.3.3 ABOND link entry Commands
5.3.3.1 Get abond link entry
Description:
Use this command to get.
Command Syntax:
get abond link entry [ifname <interface-name>] [lowif <lowif-val>]
5.3.3.2 Create abond link entry
Description:
Use this command to create.
Command Syntax:
create abond link entry ifname <interface-name> lowif <lowif-val>
[txlinkadminstatus Enable | Disable] [rxlinkadminstatus Enable | Disable]
[asmrxgroupintf <asmrxgroupintf>] [asmrxlinkindex <asmrxlinkindex>]
5.3.3.3 Delete abond link entry
Description:
Use this command to delete.
Command Syntax:
delete abond link entry ifname <interface-name> lowif <lowif-val>
5.3.3.4 Modify abond link entry
Description:
Use this command to modify.
Command Syntax:
modify abond link entry ifname <interface-name> lowif <lowif-val>
[txlinkadminstatus Enable | Disable] [rxlinkadminstatus Enable | Disable]