Planet Technology IP DSLAM IDL-4801 - Manual (Page 117)

IP DSLAM 117
5.2.3 Bridge port trfclassmap Commands
5.2.3.1 Get bridge port trfclassmap
Description:
Use this command to get.
Command Syntax:
get bridge port trfclassmap [portid <portid-val >] [regenprio <regenprio-val >]
5.2.3.2 Modify bridge port trfclassmap
Description:
Use this command to modify.
Command Syntax:
modify bridge port trfclassmap portid <portid-val > regenprio <regenprio-val >
[trfclass <trfclass-val>]
Parameters:
Name Description
portid <portid-val > Port number of the port for which this entry contains
bridge management information.
Type: Modify － Mandatory
Get － Optional
Valid values: 1-386
regenprio
<regenprio-val >
The Priority value evaluated for the received frame. In
our case, it is the regenerated user priority. This
regenerated priority is mapped from user priority
determined by a) packet classifier rule indicating user
priority for that port b) user priority received in the tag
header and c) default source priority of the port, in that
order. It lies in the range 0-7
Type: Modify － Mandatory
Get － Optional
Valid values: 0 - 7
trfclass <trfclass-val > The Traffic Class the received frame is mapped to. The
maximum value of trafficClass is defined by numTrfClass
parameter of Bridge Port PrioInfo. The default value of
this field shall be determined according to table 7-2
described in ANSI/IEEE Std 802.1d 1998 Edition