Planet Technology IP DSLAM IDL-4801 - Manual (Page 198)

IDL series User Guide 198
Output:
PortId Join Timer Leave Timer LeaveAll Timer
--------------------------------------------------------------------------------
6 30 90 5000
Output Fields:
Field Description
PortId Index of the Bridge Port.
Join Timer The GARP Join time, in centiseconds. Join time value should be
less than half the Leave time value.
Leave Timer The GARP Leave time, in centiseconds. Leave time value
should be greater than 2 times Join time value.
LeaveAll Timer The GARP LeaveAll time, in centiseconds. LeaveAll time value
should be large (more than 15 times) relative to Leave time
value.
References:
z GVRP
Commands
5.6.12 STP Group Commands
5.6.12.1 Get stp info
Description:
Use this command to display the current status of the Spanning Tree Protocol
Group.
Command Syntax:
get stp info
5.6.12.2 Modify stp info
Description:
Use this command to alter the configuration for the spanning tree protocol group.
Command Syntax:
modify stp info [priority <priority-val>] [maxage <maximum-age>] [htime
<hello-time>] [fdelay <forward-delay>] [enable|disable]