Planet Technology IP DSLAM IDL-4801 User Manual

Page 453

Advertising
background image

IP DSLAM

453

srcipaddr

<srcipaddr-val>

This parameter specifies the source IP address of the

Multicast Server. The source address and destination group

address together define a multicast stream. In case of value

0, this parameter is ignored while determining Multicast

Vlan.

Type: Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

vlanid <vlanid-val> |

none

This parameter specifies the Dot1q tag of an IGMP packet

received. This will be PVID in case an untagged IGMP

packet was received. In case of value 0, this parameter is

ignored while determining Multicast Vlan.

Type: Create -- Mandatory

Delete -- Mandatory

Modify -- Mandatory

Get -- Optional

Valid values: 1 - 4095

Additional Values: 0

mcastvlanstag

<mcastvlanstag-val> |

none

This parameter specifies the Multicast SVlanId to be used

in case of stacked mode. In the native mode, this parameter

is not applicable.

Type: Create -- Optional

Modify -- Optional

Valid values: 1 - 4095

Additional Values: 0

mcastvlanctag

<mcastvlanctag-val> |

invlan | none

This parameter specifies the Multicast CVlanId to be used.

Two special values of this parameter are supported in

stacked mode: One value (4097) to signify that repot/leave

shall be forwarded to querier with the C tag with which it was

received from the subscriber port and the S tag specified in

multicast Vlan's definition One value (0) to signify that

report/leave shall be forwarded to querier with S tag

specified in multicast Vlan's definition and no C tag. Other

Value shall signify that, report/leave shall be forwarded to

querier with S and C tag specified in multicast Vlan's

definition.

Type: Create -- Optional

Modify -- Optional

Valid values: 1 -4095

Additional Values: 0, 4097

Advertising
This manual is related to the following products: