Planet Technology IP DSLAM IDL-4801 - Manual (Page 400)

IDL series User Guide 400
srcipaddrfrom
<srcipaddrfrom-val>
Start source IP address of the range of source IP addresses.
This field is invalid if srcaddrcmp is 'any','ingenlist'
or'notingenlist'.If srcaddrcmp is either 'inrange' or 'exrange',
this field and srcipaddrto field specify a range of source IP
addresses.
Type: Create -- Optional
Modify -- Optional
Default value: 0.0.0.0
srcipaddrto
<srcipaddrto-val>
End source IP address of the range of source IP addresses.
This field is invalid if srcaddrcmp is 'any','ingenlist' or
'notingenlist'.If srcaddrcmp is either 'inrange' or 'exrange', this
field and srcipaddrfrom field specify a range of source IP
addresses.
Type: Create -- Optional
Modify -- Optional
Default value: 255.255.255.255
dstipaddrfrom
<dstipaddrfrom-val>
Start destination IP address of the range of destination IP
addresses. This field is invalid if dstaddrcmp is 'any','ingenlist'
or 'notingenlist'.If dstaddrcmp is either 'inrange' or 'exrange',
this field and dstipaddrto field specify a range of destination IP
addresses.
Type: Create -- Optional
Modify -- Optional
Default value: 0.0.0.0
dstipaddrto
<dstipaddrto-val>
End destination IP address of the range of destination IP
addresses. This field is invalid if dstaddrcmp is 'any','ingenlist'
or 'notingenlist'.This field and the previous field specifiy a
range of destination IP addresses, if dstaddrcmp is either
'inrange' or 'exrange'.Otherwise this field is invalid.
Type: Create -- Optional
Modify -- Optional
Default value: 255.255.255.255
srcmacaddrcmp eq |
neq | lt | leq | gt | geq |
any | inrange | exrange
Source Mac address comparison type.
Type: Create -- Optional
Modify -- Optional
Default value: any
dstmacaddrcmp eq |
neq | lt | leq | gt | geq |
any | inrange | exrange
Destination Mac address comparison type.
Type: Create -- Optional
Modify -- Optional
Default value: any