Planet Technology IP DSLAM IDL-4801 - Manual (Page 334)

IDL series User Guide 334
5.13.2 Clfr list genentry commands
5.13.2.1 Get clfr list genentry
Description:
Use this command to get.
Command Syntax:
5.13.2.2 Create clfr list genentry
Description:
Use this command to create.
Command Syntax:
create clfr list genentry ifname <interface-name>value <value-val> [valtype
U8|U16|U32]
5.13.2.3 Delete clcfr list genentry
Description:
Use this command to delete.
Command Syntax:
delete clfr list genentry ifname <interface-name> [value <value-val>
Parameter:
Name Description
ifname
<interface-name>
Name of ethernet, eoa, ipoe or pppoe interface, for which the
classifier generic list is created. Valid values for the field are
between EOA-0 and EOA-23 or between eth-0 and eth-1or
between IPOE-0 and IPOE-191 or between PPPOE-0 and
PPPOE-192.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
Valid values: eth-*, eoa-*, pppoe-*,ipoe*
value <value-val> List Entry Value, of the classifier generic list
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional